Publicité
Les langues disponibles
Les langues disponibles
Problem
No sound
Double image or no image with DVD
Picture is too dim or too bright
The screen is not centered correctly
All manuals and user guides at all-guides.com
Possible Solution
Ensure mute is not turned on. Pressing the Mute button on
1
the remote control turns the mute function on and off.
If only certain LCD TV channels do not have sound, then you
2
need to correct the Input Select menu in the TV Menu (see
"Input Select Menu" on page 24).
Verify that the audio cables are firmly connected to both the
3
audio input connectors on your LCD TV display and audio
output connectors on your devices. Ensure that the cable colors
match the connectors colors.
Also, ensure that the audio cables are connected to the same
4
row as the video cables. See "About Your LCD TV Display" on
page 5 for the location of the connectors.
Reconnect the device using the same type of connector. For
5
example, if you are using the composite connector on the
bottom, try connecting the device to the composite connector
on the side of the LCD TV display. See "About Your LCD TV
Display" on page 5 for the location of the connectors.
After you connect the device, change the input source in the TV
Menu. See "Input Select Menu" on page 24 for more
information.
Connect the device using a different connector. For example,
6
if you are experiencing the problem using a composite
connector, try using the component connector.
NOTE:
To connect to a different connector, you need the
appropriate cables for that connector. See your device
documentation for a list of supported connections.
After you connect the device, change the input source in the TV
Menu. See "Input Select Menu" on page 24 for more
information.
Test the device on a different TV.
7
Turn off the progressive scan on the DVD player. Your Dell™
LCD TV display offers built-in deinterlacer that is equal to or
better quality than the deinterlacer on your DVD player. For
more information about progressive scan on your DVD player,
see the documentation for your DVD player
Update the color settings in the TV Menu. Press Menu on the
remote control and select Picture Settings.
Update the size settings in the TV Menu. Press Menu on the
1
remote control and select Size.
Reset the original factory defaults. Press Menu on the remote
2
control, select Setup, and then select Factory Reset.
Troubleshooting Your LCD TV Display
33
Publicité
