Assembling The Exersaucer - Stage 2 - Evenflo Baby Active ExerSaucer Mode D'emploi

Masquer les pouces Voir aussi pour Baby Active ExerSaucer:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Assembling the ExerSaucer
Stage 2 is for children who can hold their head up unassisted until they are walking or can stand
Stage 2
flat-footed in the highest adjusted position, and are under 30 inches tall.
A
D
B
C
2. Locate (3) feet
D
Remove foot by squeezing tab
A
3. Align slots in foot
Repeat until all three (3) feet are installed on legs. Pull foot to
make sure it is locked onto leg.
D
B
2
1. Turn ExerSaucer tray
(3) legs
. Push red release button
B
up until it locks into the most upright position. Repeat
until all three (3) legs are locked into place. Push leg to
make sure it is locked in position.
C
on underside of tray
.
A
as shown.
E
D
with tabs on leg
. Snap foot onto leg.
D
B
Stage 2
upside down and locate three
A
and rotate leg
C
E

Publicité

Table des Matières
loading

Table des Matières