Technical Data - Hilti PD-E Mode D'emploi

4 Technical data

Right of technical changes reserved.
Power supply
Battery condition check
en
Measuring range with target plate
Accuracy (distance measurement)
Accuracy (inclination measurement)
Basic operating modes
Optical sight
Display
Laser class
Laser automatic switch-off
Tool automatic switch-off
Battery life
Operating temperature range
Storage temperature range
Protection class 3
Weight (including batteries)
Dimensions
1 Influences such as particularly high temperature fluctuations, dampness, shock, dropping, etc. can affect accuracy. Unless stated
otherwise, the tool was adjusted or calibrated under standard ambient conditions (MIL-STD-810G). When taking distance measure-
ments, as a basic rule, an additional distance-dependent error of 0.0008 inch per 3 ft is to be taken into account.
2 The reference for the inclination sensor is the underside of the tool (battery compartment). Influences such as particularly high tem-
perature fluctuations, dampness, shock, dropping, etc. can affect accuracy. Unless stated otherwise, the tool was adjusted or cali-
brated under standard ambient conditions (MIL-STD-810G).
3 Except the battery compartment
Menu / units
m
cm
mm
in
in ¹⁄₈
in ¹⁄₁₆
in ¹⁄₃₂
ft
ft ¹⁄₈
ft ¹⁄₁₆
ft ¹⁄₃₂
Yd
4
All manuals and user guides at all-guides.com
1
2
Distance
meters
centimeters
millimeters
inches (decimal)
¹⁄₈ inch
¹⁄₁₆ inch
¹⁄₃₂ inch
feet (decimal)
feet ‑ ¹⁄₈ inch
feet ‑ ¹⁄₁₆ inch
feet ‑ ¹⁄₃₂ inch
yards (decimal)
2 x 1.5 V, type AAA batteries
Battery condition indicator with 4 segments showing
100%, 75%, 50%, 25% charge. No segments shown =
battery is completely discharged.
0...200 m (0...650 ft)
± 0.04 in (2σ, standard deviation)
± 0.2° (2σ, standard deviation)
Individual measurement / continuous measurement
Side-mounted, with laser reference
Illuminated liquid crystal display with permanent indi-
cation of distances, operating status and battery condi-
tion
Visible 635 nm, output power < 1 mW: Laser Class 2
EN 60825-1:2007; IEC 60825-1:2007; Class II CFR 21 §
1040 (FDA)
1 min
10 min
Room temperature: Up to 5000 measurements
-10...+50°C (+14...+122 °F)
-30...+70°C (−22...+158 °F)
IP 65 (protection against dust and water spray)
IEC 60529
165 g (0.36 lb)
129 mm (5.1 in) x 60 mm (2.4 in) x 28 mm (1.1 in)
Area
m²
m²
m²
in²
in²
in²
in²
ft²
ft²
ft²
ft²
yd²
Volume
m³
m³
m³
in³
in³
in³
in³
ft³
ft³
ft³
ft³
yd³