Carrier 33NTC-HS Instructions page 8

NTC
NTC system configuration
Item Value
11-
Unit's remote ID
A
1
2
3
...
7
12-
HVAC system
Ye
No
Configuration menu – Supplement
Item 4- - Item 5-:
The user desired temperature can be set through buttons
Temperature increase or decrease starts from the factory-set value
of 22C (72F).
Each time button or is pressed, temperature is increased or
decreased by ±0.5 degrees (or ±1F).
In this case the temperature range is between 20 C and 24C (68F
to 76F).
In any case, the user can increase this temperature range by
changing item 4 and 5 values.
Item 4 is the starting temperature and item 5 is the value to be
assigned each time button
There follow some examples according to the scale range required
(we suggest changing item 5 ONLY):
GB - 8
Description
Unit remote ID ALL
Unit remote ID 1
Unit remote ID 2
Unit remote ID 3
...
Unit remote ID 7
[Defaults: "A" All]
Some application needs to manage
just the power module, without any
other system linked
An HVAC system is present
An HVAC system is NOT present
[Default: "Ye": HVAC system is
present]
or is pressed.
Displayed
YES
YES
In both Occupied or Unoccupied
mode:
The temperature icon will be
hidden. Light and Blind icons
will appear just if selected
Item 5 = 2C (4F)
Minimum temp. = 14C (56F) —> automatically set at 15C (59F)
or .
Maximum temp. = 30C (88F)
Item 5 = 1.5C (3F)
Minimum temp. = 16C (60F)
Maximum temp. = 28C (84F)
Item 5 = 1C (2F)
Minimum temp. = 18C (64F)
Maximum temp. = 26C (80F)
The user can also set the value of item 4 so that no temperature
increase or decrease can change it when button
pressed. To do so, set the desired fixed temperature value in item 4
and set 0C (0F) in item 5.
Anyway, the desired maximum temperature value is 32C (90F).
AQUASMART MAESTRO
Available Available
Available Available
or is