Volume Control; Tone Control; Boost Switch; Battery Indicator - Geemarc CLA-40 VOX Notice D'utilisation

SETTINGS
The CLA-40VOX can only be used with standard phones without any amplification
or tone adjustment.

3 - VOLUME CONTROL

You can adjust the volume control level by using the "VOLUME" control slide
switch located on the top. Volume can be adjusted from the standard level of
your phone up to 30 dB or more.

4 - TONE CONTROL

You can adjust the tone by using the 5 position "TONE" switch located on the
top.The tone can be adjusted in 5 dB step from the 0dB mid point to the Hi or
LO positions shown according to your individual requirements .

5 - BOOST SWITCH

If you wish you can increase the receiving up to 10 dB more by pressing and
holding the Boost switch button. During this operation the microphone is muted
to avoid feedback problems. To speak release the button so that other party can
hear you.

6 - BATTERY INDICATOR

The battery LED indicator should illuminate every time you use your CLA-
40VOX. If the LED start to fade or does not light when your CLA-40VOX is in
use, you should change the battery to ensure optimum sound quality and
performance.
IMPORTANT:Always disconnect CLA-40VOX from the phone before replacing
the battery.
9