Leatt LT1701 MTB 3.0 ENDURO Mode D'emploi page 10

HELMET FOR PEDAL CYCLISTS ONLY-NOT INTENDED FOR USE IN MOTOR SPORTS OR
BY MOTOR CYCLISTS. NO HELMET CAN PROTECT THE USER AGAINST ALL FORESEEABLE
IMPACTS. SERIOUS INJURY OR DEATH MAY OCCUR WHIST WEARING A HELMET. READ
OWNERS MANUAL BEFORE USE. FOR MAXIMUM PROTECTION, THIS HELMET MUST FIT
CLOSELY AND BE SECURELY FASTENED IN ACCORDANCE TO MANUFACTURER'S FITTING
INSTRUCTIONS. MAKE NO MODIFICATIONS. IF HELMET EXPERIENCES A SEVERE BLOW,
RETURN IT TO THE MANUFACTURER FOR INSPECTION, OR DESTROY AND REPLACE IT. IF
HELMET SHOWS SIGNS OF DAMAGE, DESTROY AND REPLACE IT. HELMET CAN BE SERIOUSLY
DAMAGED BY SOME COMMON SUBSTANCES WITHOUT DAMAGE BEING VISIBLE TO USER
SUCH AS: GASOLINE, PETROL, PAINT, ADHESIVES, OR CLEANING AGENTS OR BY EXCESSIVE
HEAT. APPLY THE FOLLOWING; MILD SOAP AND WATER FOR CLEANING. COMFORT
PADDING CAN BE HAND WASHED AND AIR DRIED. SHELL AND LINER CONSTRUCTED OF
CARBON, ARAMID, GLASS FIBRES WITH EPOXY RESIN AND EXPANDED POLYSTYRENES.
WARNING FOR PARENTS: THIS HELMET SHOULD NOT BE USED BY CHILDREN WHILE
CLIMBING OR DOING OTHER ACTIVITIES WHEN THERE IS A RISK OF STRANGULATION/
HANGING IF THE CHILD GETS TRAPPED WITH THE HELMET. INJURY, STRANGULATION, OR
DEATH MAY OCCUR.
Instructions
Do not make any modifications to the Helmet, this includes the outer shell, the inner EPS
liner or chin strap, any and all modifications will void all warranties and affect the Helmet's
performance.
The helmet is suitable for use with goggles.
The liner is essential to the intended performance of the helmet.
The helmet has a limited lifespan in use and should be replaced when it shows obvious signs
of wear, e.g. change of fit, cracks, rust or fraying.
The Leatt ® MTB Helmet forms part of the protective equipment ensemble available for use
by participants in cycling activities. Always perform any cycling activity with caution and use/
wear appropriate safety equipment.
The helmet can only protect if it fits well. Therefore, try different sizes and choose the size
which feels right on the head. Recommended packaging for storage and transport is the
helmet box and bag provided with the helmet.
Position the straps of the helmet so that they do not cover the ears, the buckle positioned
away from the jawbone and the straps and buckle adjusted to be both comfortable and firm.
We recommend to replace your helmet at least every five years from the date you start using
it. Helmet may have to be replaced more frequently if they are subjected to intensive use.
10
WARNING
Copyright © 2020, Leatt ® Corporation