Heath Zenith 6155 Serie Mode D'emploi page 4

Your wireless chime has different selectable tunes: Ding (one note), Ding-Dong
(two note), or Westminster (eight note) (Available on selected chimes). The
factory setting is for the Ding-Dong tune (or Westminster, when available). This
tune can be changed by following the instructions below.
• Ding (one note tune)
Inside Push Button: Add a jumper to location 8.
• Ding-Dong (two note tune)
Inside Push Button: Remove jumper from location 8.
Inside Chime: Remove jumper from location 8.
• Westminster (Eight note tune) (Available on selected chimes)
Inside Push Button: Remove jumper from location 8.
Inside Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities.We recommend
the back door use the Ding tune and the front door use the Ding-Dong tune
(or Westminster tune, available on selected chimes). Models that include two
push buttons will come factory set for front and back doors. Decals on the rear
of the push button will indicate its setting.
Inside Chime
Tune Settings
Tune Setting
(Not used on all
models)
Note: Some models might require the use of
tweezers to remove and replace the jumpers.
Figure 8
-4-
Inside Push
Button
Tune Setting
200200-01