Bestron AAC5000 Mode D'emploi page 31

Masquer les pouces Voir aussi pour AAC5000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
OPERATION - Cooling / Humidifying the air
The appliance is equipped with a cooling/humidification system, allowing you to cool and humidify the blown
out air. The system also works air-cleaning.
1. Remove the plug from the wall socket.
2. Unlock the water tank (see nr. 5 in figure 1).
3. Pull out the water tank until it stops.
4. Fill the water tank with min. 1.5 and max. 4.5 liters of
(ice)cold water (see figure 2).
5. Insert the water tank back into the appliance.
6. Lock the water tank.
7. Connect the plug into a wall socket.
8. Turn on the appliance as described under 'OPE-
RATION - Ventilation'.
9. Press the "humidifier" button to activate the cooling/
humidi-fication system. The blown out air is now
cooled, humidified and cleaned.
10. Press the "humidifier" button again to deactivate
the cooling/humidification system.
WARNING:
The colder the water you fill the reservoir with, the
colder the blown air.
Replace the water every 3 to 4 days, see 'CLEANING
AND MAINTENANCE'.
OPERATION - Purifying the air
An optional air purifying filter is included with the appliance as an accessory. This air purifying filter removes
small dust and dirt particles from the air and thus improves the air quality in the room.
If you want to use the air purifying filter, install it as follows:
1. Remove the intake filter from the back of the appliance (see figure 3).
2. Place the air purifying filter in the filter frame (see figure 4).
3. Reinstall the intake filter into the appliance (see figure 5).
WARNING:
When using the air purifying filter, the airflow coming from the appliance decreases.
3
31
4
EN
2
5

Publicité

Table des Matières
loading

Table des Matières