Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Index Search
An index mark will be assigned at the beginning of each record-
ings you make. You may skip to a specific marked point by fol-
lowing the steps below.
Press [SEARCH-MODE] so that the Index Search menu
1
appears.
2
Enter the number of recordings you
wish to skip by pressing [PLAY] or
[STOP] within 30 seconds.
3
Press [F.FWD] or [REW] to start index search. If you
want to go in the forward direction, press [F.FWD]. If you
want to go in the reverse direction, press [REW].
• After index search, the VCR will play the tape automati-
cally.
Time Search
This feature allows you to go to a specific point on a tape by
entering the exact amount of time you wish to skip in order to
reach the point.
1
Press [SEARCH-MODE] so that the Time Search menu
appears.
2
Enter your desired time to skip by
pressing [PLAY] or [STOP] within 30 seconds.
Press [F.FWD] or [REW] to start time search. If you want
3
to go in the forward direction, press [F.FWD]. If you want
to go in the reverse direction, press [REW].
• After time search, the VCR will play the tape automati-
cally.
RECORDING FUNCTION
It may be unlawful to record play back copyrighted material with-
out the consent of the copyright owner.
Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record safety tab. To
record on it later, cover the hole with cello-
phane tape.
Before recording, make sure:
• The desired channel is selected by pressing [Number] on
the remote control or the [CHANNEL
nected the VCR to a cable box or satellite box as in "VCR
to TV Connection" on page 3, select the VCR to channel
3 or 4 the same channel as the RF output channel of the
VCR. Then, select the channel you want to record at the
cable box or satellite box. In this case, you can ONLY
record and view the SAME channel. )
• There is a tape with its safety tab into the VCR.
• The desired recording speed is selected in SP(standard play) or
SLP(super long play) mode by pressing [SPEED] on the remote
control.
• TV STEREO or SAP is selected.
Tape Speed
Type of tape
SP mode
SLP mode
Viewing and Recording the Same Program
1
Begin the recording by pressing [RECORD].
• To temporarily stop recording or resume it, press
[PAUSE/STILL]. After the VCR has been in Pause mode for
5 minutes, it will stop automatically to protect the tape and
the video head from damage.
Press [STOP] when recording is completed.
2
INDEX SEARCH
TIME SEARCH
2 : 50
Record safety tab
(
)
]. (If you con-
Recording/Playback Time
T60
T120
1hour
2hours
3hour
6hour
OTR (One Touch Recording)
This feature allows you to set the recording length simply by
pressing [REC/OTR] on the VCR.
1
Begin OTR by pressing [REC/OTR] on the VCR repeat-
edly until the desired recording length appears.
REC
(Normal recording)
03
TIMER RECORDING
You may set the VCR to start recording while you are away. You
can set eight programs to record on specific days, daily or week-
ly within a 1 year period.
Insert a tape with its safety tab into the VCR.
1
Select main menu by pressing [MENU].
2
3
Select "TIMER PROGRAMMING" by pressing [PLAY] or
[STOP]. Then, press [F.FWD].
• If you have not yet set the clock, "CLOCK SET" appears. If
so, continue with the step [3] in "CLOCK SET UP" section.
Then, set the timer recording.
4
Set the timer.
Set the program number (1~8)
Program number which is not set up flashes.
Press [PLAY] or [STOP] repeatedly for the
desired program number.Then, press [F.FWD].
Select once, daily or weekly recording
For once: Press [PLAY] or [STOP] to point to "ONCE".
For daily (Monday~Friday): Press [PLAY] or
[STOP] to point to "DAILY".
For weekly: Press [PLAY] or [STOP] to point to
"WEEKLY".
Then, press [F.FWD].
Set the date
First, press [PLAY] or [STOP] for the month. Then, press [F.FWD].
Next, press [PLAY] or [STOP] for the day. Then, press [F.FWD].
Set the start time
First, press [PLAY] or [STOP] for the hour. Then, press [F.FWD].
Next, press [PLAY] or [STOP] for the minute. Then, press [F.FWD].
And then, press [PLAY] or [STOP] for AM or PM. Then, press [F.FWD].
Set the end time
Follow the instructions of "Set the start time" to set the end time.
Set the channel number
Press [PLAY] or [STOP] repeatedly for the desired channel number.
Then, press [F.FWD].
If you connected the VCR to a cable box or satellite box as in "Connect
VCR to TV" on page 3, select the VCR to channel 3 or 4 the same channel
as RF output channel of the VCR.
Then, select the channel you want to record at the cable box or satellite box.
T160
Leave the cable box or satellite box on for timer recording.
2-2/3hours
8hour
Set the tape speed
Press [PLAY] or [STOP] repeatedly for the
desired tape speed.
Then, press [F.FWD].
• To go back one step, press [REW].
5
To set another program, repeat step [4]. To exit, press
[C.RESET/EXIT].
6
Press [POWER] to set the timer. The TIMER indicator on
the VCR comes on. TIMER RECORDING WILL NOT BE
ACTIVATED UNLESS YOU TURN THE VCR OFF.
– 5 –
OTR(0:30)
OTR(8:00)
OTR(7:30)
OTR(1:00).....
PROGRAM NUMBER 4
DATE
- - / - -
START TIME - - : - -
- -
END
TIME - - : - -
- -
CHANNEL
- -
REC SPEED - -
PROGRAM NUMBER 4
ONCE
DAILY
WEEKLY
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE
05/12 MON
START TIME 07:30
PM
END
TIME 08:30
PM
CHANNEL
16
REC SPEED SP
SP
SLP
EN
Publicité
Table des Matières
Dépannage
