Avidsen 103955 Mode D'emploi page 39

Screen lock
1. Press Press Press Press Press Press Press Press Press for 5 seconds , the word appears at the top left for 5 seconds , the word appears at the top left "LOC" for 5 seconds , the word appears at the top left for 5 seconds , the word appears at the top left for 5 seconds , the word appears at the top left for 5 seconds , the word appears at the top left for 5 seconds , the word appears at the top left for 5 seconds , the word appears at the top left for 5 seconds , the word appears at the top left
the keyboard is locked.
2. To unlock, repeat the same procedure described above
Backlight
The backlight will be turns on by press any buttons and turns off when
there is no activity after 15 seconds.
Calibrate the temperature
Under the Technical setting mode, press > once to access the tem-
perature calibration mode. Use +/- buttons to set from -3.0~+3.0
(in 0.5°C increments).
Technical settings
1. Press 1. Press 1. Press 1. Press 1. Press 1. Press 1. Press 1. Press 1. Press once to access the setting mode. once to access the setting mode. once to access the setting mode. once to access the setting mode. once to access the setting mode. once to access the setting mode. once to access the setting mode. once to access the setting mode. once to access the setting mode.
2. Press +/- button to choose the TECH SET (Technical setting mode),
the installer could setting the different parameters as below stated.
Restoring thermostat to factory default setting
Resetting the thermostat will return to default setting. The time,
date settings will all be maintained.
Under the Technical setting mode, press the > button to choose the
reset mode (the screen display rESE), hold > for 3 seconds until the
screen is full displayed, release the button now to restore the factory
default settings.
9