ProScan PAC100-B Manuel D'utilisation page 8

Resolution: press OK, screen show 12M/10M/8M/5MP/3MP/2M/1MP, press OK to
choose the resolution and exit (3MP interpolated, 5MP interpolated).
Single Shot: OFF/ON, press OK under OFF to close this function, press OK under
ON to open the function, it will take single shot photo.
Burst Photo: press OK under OFF to close this function, press OK under ON, one
shot camera will take three photos.
Time Lapse: OFF/2S/10S, choose 2S/10S, one shot camera will take photo after
2second/10 seconds
Continuous Lapse: OFF/2S/3S/5S/10S/20S/30S/60S, after choose the time,
camera will take photo after 2S/3S/5S/10S/20S/30S/60S.
3) Playback mode:
Press mode button to enter the replay screen, press up/down key to choose
the video or photo to replay. This function works only if you have taken photo
or video, if no photo or video is taken, it will be shown as no file.
4) Menu setting
Under video/photo mode, press down key first and then press OK to enter menu
setting as shown in bellow screen.
Sound: click OK to enter the function, choose Shutter, Start-up, Beep, Volume by
pressing up/down key, press OK to change the data for each small section, press
MODE to exit.
7