ProScan PAC100-B Manuel D'utilisation page 6

1. Inserting Micro SD Card
Note: Sometimes when you are using the Micro SD card for the first time in this
camera, it can't read the data of Micro SD card, please format it on computer or
in the setting menu before using (please do remember to back up your data
before formatting the card). If possible, please choose branded card for a better
using experience.
2. Installing and removing batteries
A:Open the battery door as shown in below picture;
B: Insert the battery and close the battery door.
3. Charging
Connect the camera to computer for charging under shutdown status.
The blue charging indicator will be on when charging, and will be off
when the battery is fully charged. Generally, the battery can be fully
charged after about 3-5 hours. This camera is charged by 5V 1A charger,
(Remark: This camera works with Max voltage 5.25V, and electric current
2A for charging, and it will be damaged if charging is done beyond this
max voltage and current. )
4. Switching camera on and off
A Press
B Switch it on and off by turning display screen on and off.
and hold power switch for 3 to 5 seconds to turn it on / off.
5