Ahrend 500 Mode D'emploi page 32

3
Workstations with hinged cable
dumps
These cable dumps open on hinges
for ease of access to the contents.
It may sometimes be necessary to
wheel a mobile drawer pedestal
out of the way first.
English
4
The cable dump is opened by simul-
taneously pushing down the clips at
the two opposite ends.
Leading cables along the edge of the work surface
Equipment cables are led around the edge of the work
surface (fig. 3).
If required, cables can also be pushed into cable guides
on the underside of the top so that they are held by the
hooks and do not dangle (fig. 4).
The dump will then drop open. After the necessary changes have
been made, the cable dump is
closed again by pressing it shut.
Make sure that the clips on each
side click back into place.
31