Bluetooth Mobile Phone - Kenwood KDC-X798 Mode D'emploi

Bluetooth mobile phone

To Do this
Receive a call
Press
of the number buttons (1 to 6) (or
press
• All the buttons and display flash
when there is an incoming call.
During a call, the buttons and
display illuminate according to the
settings made for [DISPLAY]. ( 20)
• When [AUTO ANSWER] is set to the
selected time, the unit answers
incoming call automatically. ( 16)
Reject an incoming Press B SRC (or press
call RC-406).
End a call
Press
RC-406).
Switch between
Press 6 IW during a call.
hands-free and • Operations may vary according to
private talk modes
the connected Bluetooth device.
Adjust the phone
Turn the volume knob during a
volume call.
Phone volume: [00] to [35]
(Default: [15])
• This adjustment will not affect the
volume of the other sources.
Switch between two
Press
connected phones
• Not applicable during a call.
While talking on the phone...
1
or the volume knob or one 2
on RC-406). 3
To return to the previous setting item or hierarchy, press
on
or B SRC (or press
on
When the phone receives a text message, the unit rings and "SMS RECEIVED"
appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
1
2
repeatedly.
• Supported Voice Recognition features vary for each phone. Refer to the instruction
• This unit also supports the intelligent personal assistant function of iPhone.
Improve the sound quality during a call
Press the volume knob to enter [FUNCTION].
Turn the volume knob to make a selection (see the following table), then
press the knob.
Press and hold to exit.
MIC GAIN –20 — +8 (0): The sensitivity of the microphone increases as the number increased.
NR LEVEL –5 — –20 (–10): Adjust the noise reduction level until the least noise is being heard
during a phone conversation.
ECHO CANCEL 1 — 10 (4): Adjust the echo cancellation delay time until the least echo is being heard
during a phone conversation.
Text message notification
Use Voice Recognition
Press and hold to activate Voice Recognition.
The connected phone (which has been paired the earliest) is activated. However,
if priority device is connected, pressing and holding
device. ( 17, DVC PRIORITY)
Speak the name of the contact you want to call or the voice command to
control the phone functions.
manual of the connected phone for details.
BLUETOOTH®
.
Default: XX
activate the priority
ENGLISH | 15