Samsung DC68-03144A Mode D'emploi page 11

ALIGNMENT AND ADJUSTMENTS
To avoid risk of electrical shock, personal injury or death; disconnect power to washer
before servicing, unless testing requires power.
Board Input Test Mode
Definition of Board Input Test Mode:
- Board Input Test Mode is to displays a specified input after a key press.
How to Enter:
- To enter the Board Input Test Mode, press the Extra Rinse Key during Service Mode.
Board Input Test Mode:
1. Activate the Service Mode first.
2. Press the Extra Rinse Key to start Board Input Test.
3. Turn the Jog-Dial so that the Normal Course LED is turned on. The Water Temperature will be
displayed in Celsius.
4. Turn the Jog-Dial so that the HeavyDuty Course LED is turned on. The Water Temperature will be
displayed in Fahrenheit.
5. Turn the Jog-Dial so that the Perpress Course LED is turned on. The door status will be displayed
(OP if open, CL if closed).
6. Turn the Jog-Dial so that the Sanitize Course LED is turned on. The Door Lock Switch status will
be displayed (UL if unlocked, LO if locked).
7. Turn the Jog-Dial so that the Bedding Plus Course LED is turned on. The Water Frequency will be
displayed.
8. Turn the Jog-Dial so that the Night Wash Course LED is turned on. The SilverCare Status will be
displayed.(defualt : "--")
WF405ATP-03144A_EN.indd 11
WARNING
11
2012-03-02 9:28:49