Installation; Mounting The Pdu; Connecting The Pdu - Tripp-Lite PDUMH15HVAT Manuel Du Propriétaire

2. Installation

2.1 Mounting the PDU

The PDU supports 1U Rack configurations.
Note: The user must determine the fitness of
hardware and procedures before mounting. The PDU
and included hardware are designed for common
rack and rack enclosure types and may not be
appropriate for all applications. Exact mounting
configurations may vary.
1U Rack Mounting: Attach the PDU to the
rack by inserting four user-supplied screws
through the PDU mounting brackets
into the mounting holes of the rack rail as
shown.

2.2 Connecting the PDU

All PDU models include a primary and secondary AC power input (see diagram). The reference
table below lists each model's primary and secondary inputs:
Model
PDUMH15HVAT*
PDUMH15HVATNET*
PDUMH20HVAT1*
PDUMH20HVATS*
PDUMNH20HVAT1*
PDUMN20HVAT*
PDUMH20HVATNET*
*PDU includes one C13 to C14 (PDUMH15HVAT/NET) or two C19 to C20 (PDUMH20HVAT, PDUMH20HVAT1,
PDUMH20HVATS, PDUMNH20HVAT1, PDUMH20HVATNET) interconnection cables for the two primary and
secondary inlets, which may be used to connect to upstream UPS sources. Alternately, the user can supply IEC
cables fitted with country-specific plugs.
PDUMH15HVAT
PDUMH15HVATNET
A
and
B
Primary Input
IEC C14 inlet (detachable cord)
IEC C14 inlet (detachable cord)
IEC C20 inlet (detachable cord)
IEC C20 inlet (detachable cord)
IEC C20 inlet (detachable cord)
IEC C20 inlet (detachable cord)
IEC C20 inlet (detachable cord)
Secondary Input Primary Input
Primary Input
Primary Input (208-240V Models)
4
B
PDUMH15HVAT, PDUMH15HVATNET
B
PDUMH20HVAT, PDUMH20HVAT1,
PDUMH20HVATS, PDUMNH20HVAT1,
Secondary Input
IEC C14 inlet
IEC C14 inlet
IEC C20 inlet
IEC C20 inlet
IEC C20 inlet
IEC C20 inlet
IEC C20 inlet
PDUMH20HVAT,
PDUMH20HVAT1,
PDUMH20HVATS,
PDUMNH20HVAT1,
PDUMH20HVATNET
Primary Input
A
A
PDUMH20HVATNET