VONN Lighting VAW1261 Guide D'installation page 3

Step 1. Install Mounting Plate
Bare Copper
(Ground Wire)
Black
(Line Wire)
Mounting
A
Bracket
Outlet
B
Mounting Screw
A
Bracket
Ground
D
Screw
White
(Neutral Wire)
Wire
C
Connector
Attach mounting bracket (A) to outlet box
with outlet screws (B).
Step 2. Connect Wires
Supply Wires:
Connect Black (Line Wire) from fixture to Black (Hot Wire)
from outlet box.
Connect White (Neutral Wire) from fixture to White (Neutral
Wire) from outlet box.
Ground Wires:
Connect Green (Ground Wire) from fixture to Green or Bare
Copper (Ground Wire) from outlet box.
Twist wires together clockwise and secure with wire
connector (C).
Installer Tip (1): If ground wire is not available in outlet box,
then secure Bare Copper (Ground Wire) from fixture to
ground screw (D) on mounting plate (A).
Installer Tip (2): Supply wires can be either tucked into
outlet box or fixture canopy.
©VONN Lighting,2019