Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4 IN 1 CONVERTIBLE METAL CRIB
WARNINGS:
*
CAUTION - ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8
INCHES (69CM BY 131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM).
The day bed is not intended for children under 15 months of age or over 50 lbs (22.7 kgs).
*
DAY BED ASSEMBLY INSTRUCTION: STARTING FROM CRIB
STEP 1: Detach the front panel (D) from left and right side panels (B & C) with the Allen key (4).
STEP 2: If mattress support (E) is not in the lowest position, unscrew mattress support bolts (2) from
left and right panels (B & C) and move it to the lowest position.
STEP 3:
Attach bottom rail (F) to the side panels (B & C) using bolts (2). Use the Allen key (4) to
tighten all bolts.
STEP 4: Ensure all bolts are tightly secured.
DAY BED ASSEMBLY: STARTING FROM SCRATCH
STEP 1: Follow steps 1 to 3 of the crib assembly instruction.
STEP 2: Follow steps 2 to 4 for the day bed assembly instruction located above (starting from crib).
DL8410B4 / DL8410B4-GD
Publicité
Table des Matières
