4 IN 1 CONVERTIBLE METAL CRIB
DL8410B4 / DL8410B4-GD
STEP 2
Attach mattress support (E) to side panels (B & C) and headboard (A) with bolts (3). Use the Allen key
(4) to tighten the bolts.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following steps.
CORRECT
CORRECT
*
Tabs on corners of mattress
"THIS SIDE UP" label shows which
support should point up.
side to face upward.
NOTE: The above photos and drawings showing how to properly attach the mattress support are for
reference only. Crib styles and colors will vary.