Armrest Settings - Scout MOBILITY Agilo Manuel D'utilisation

4.4

Armrest settings

Armrest height and –angle setting (fig 4.11).
1. Loosen the nuts (1).
2. Turn the bolt (2) to set the
armrest in the desired position.
3. Tighten the nuts (1).
4. Losen the screws (3).
5. Set the arm pad in the desired angle.
6. Tighten the screws (3).
Make sure that the arms are
supported well, without the shoulders
being pushed upward.
Armrest depth setting (fig 4.12).
1. Loosen the bolts (1).
2. Slide the armrest in the desired
position (2).
3. Tighten the bolts.
Setting the seating system (for qualified specialists)
Figure 4.11
Figure 4.12
31