Uninstallation; Hardware Installation; Hardware Installation For Pci-E Card - Atlantis NetFly PCIe WN Manuel

3.2 Uninstallation

To uninstall the Wireless PCIe Card, go to the Control Panel of your system.
 Open the Add/Remove Programs.
 Select the Realtek Wireless Lan Card in the Add/Remove
Programs and then click on the Remove.

Click on Remove ALL.
 Then chose Yes, I want to restart my computer and click Finish.
Now (shut down before the computer the PC) You can remove the PCIe Card.

4. HARDWARE INSTALLATION

4.1 Hardware Installation for PCI-E Card

The setup of the Wireless LAN Card can be performed using the following steps:
 Shut down the computer, unplugs its power cord, and remove the
chassis cover.
 Insert the contact edge of the NetFly card into the connector of any
available PCI Express slot. Press the card firmly into the connector such
that the card's contacts are fully seated in the connector.
 Install the bracket screw and secure the card to the computer chassis.
 Visually inspect the PCIe Card and make sure that it is fully plugged in to
the PCI Express slot.
 Cover the computer's chassis.
 Switch computer power on.
The OS will start an automatic hardware discovery procedure in order to find and
install the best driver available for the device.
Click OK to continue.
Make sure that there is a well environment that there is no
much intrusion to have a better connection.
29