Software Installation; Utility And Driver Installation - Atlantis NetFly PCIe WN Manuel

 One MultiLanguage Quick Start Guide (English, French and Italian)

CD-Rom with Utility, Driver and Manual (English, French and Italian)
 1 x Warranty Card and 1 x WEEE Card
If any item is found missing or damaged, please contact your local reseller for
replacement.

3. SOFTWARE INSTALLATION

This section will lead you to install the driver and utility of the Wireless LAN
Adapter/Card.

3.1 Utility and Driver Installation

 Insert the CD-ROM and the Auto-run program will appear (alternatively,
open a file browser and double click on the start.htm file located in the
CD directory).
 Click
Page.
 Select the Driver for Your OS and the install wizard will begin installing
the software.
 Follow the Install Shield Wizard Instructions. Click Next to continue and
finish it.
Please plug PCIe Card (shut down before the computer the PC) into PCI Express
Slot (check the next section), it will be recognized and auto installed.
The installation program will help you to setup the Wireless LAN utility.
A02-PCIE(1)-W(300)N to select NetFly PCIe Wireless Home
If you need to install the driver/utility manually, refer each
Windows OS to the following CD-Rom directory path:
ROm:\A02-PCIE-WN\Driver\< OS>.
(How do I know if my adapter is
Optional
installed properly?)
Go to Start > My Computer > Properties then select the
Hardware Tab. Click the + sign, next to Network
Adapters. Right-click on Realtek RTL8191(2)SE Wireless
LAN 802.11n PCI-E NIC. Select Properties to check that
the drivers are installed properly.
Status to check that the device is working properly.
28
Look under Device
CD-