Publicité
Les langues disponibles
Les langues disponibles
CONSOLE INPUT MODULE
FUNCTION
INDICATORS:
INTERNAL
CONFIGURATIONS:
CONTROLS:
CONNECTIONS:
CONNECTING THE MCT12
To carry out the connection of this module it is necessary to follow the steps specified on the next page.
Define the consoles priority. To do that, you will have to place two PRIORITY jumpers according to the priority you wish
this module to have, (indication nr.1 of the figure on next page). For example: To set the priority to 3, place the two
jumpers at positions J103 and J106.
ATTENTION: There can be only one module with priority 1. Remember that every module containing
information must be installed on the same chassis.
Insert and screw the module and the chassis together in the front and back panels.
Connect the data buses (Flat 10- and 20-way cables) to the connectors marked with nr.2 in the figure on next page.
Link together the front and back panel. In this case you will have to connect following connector pairs marked as nr.3:
J112-TS101, J113-TS102, J110-TS103, J109-TS104, J111-TS105.
The connector marked as nr.4 in the figure on next page will be used to connect the recorded message module (MMG1).
With this connection we indicate with which console we will be able to record the messages.
50.0035.01.00
MODULE TO LINK THE 4, 8 OR 12 ZONES CONSOLE TO THE SOUND SYSTEM.
ADDRESSES THE SPOKEN MESSAGES TO THE SELECTED ZONES RESPECTING THE
PRIORITY LEVELS.
DESCRIPTION
Tone controls designed to improve the intelligibility in deficient acoustic installations.
The level control is associated with a double colour LED to improve the level adjustment.
(The LED must be green and not red).
FEATURES
PAGING
: Message being sent by the sound system
SIGNAL LEVEL
: Optimum level adjustment
PRIORITY LEVEL
: 1, 2, 3
VOLUME
TREBLE:
-20 +10dB 10kHz
MID
:
-20 +10dB 1.8kHz
BASS
:
-20 +10dB 100Hz
A
: Connector RJ45 6 pins to connect to the 4,8 or 12 zones console
B
: Connector RJ45 4 pins to connect to the 8 or 12 zones console
C
: Connector RJ45 4 pins to connect to the 12 zones console
D
: Connector RJ45 8 pins to connect to the 4,8 or 12 zones console
MCT12 MODULE
PRIORITY
MCT12
1/2
Publicité
