Select The Adsl Interface Mode; Configure The Lan Ip Address - Topcom Xplorer 870+ Manuel D'installation

Xplorer 870+

6. SELECT THE ADSL INTERFACE MODE

The ADSL Router supports four interface modes:
Parameters
Multimode
ANSI T1.413 issue 2
G.DMT
G.Lite Off
Your Internet Service Provider (ISP) will tell you the which setting you have to
choose. We recommend to select Multimode.
Click OK to confirm the entry.
Note: To save the settings, please select "Save Configuration" and then click "Save".

7. CONFIGURE THE LAN IP ADDRESS

The LAN connection setup entry comes with the following parameters:
Parameters
IP Address
Subnet Mask
Default Value
Default
Off
Off
Description
The Routers IP address
The subnet mask of the LAN interface
Default Value
192.168.1.1
255.255.255.0
14 14 14 14 14 14 14 14