C-Pen ExamReader Guide De Démarrage Rapide page 6

text line shall be centered in between the two white
nibs in the front end. Scanning start and stop points
are aligned with the edge of the transparent
window.
When the Scan Trigger gets in touch with the paper,
the scan light lits up. Start moving the pen straight
along the text line at a steady pace, avoid stops, do
not rotate the pen, and keep the text line in
between the nibs.
Left/Right hand setting *must* be correct, but it is
possible to scan both from left to right and from
right to left at any time. Give it a try...
Scan this line from left to right.
Scan this line from right to left.
For more details check the online guide.
T��� R����� ��������
There are quite a few settings and options in Text
Reader mode. To access these, press MENU button
when in Text Reader mode.
C���� ������ - use to erase all content you have
scanned. Press OK button to clear screen.
A����� ���� - controls whether a new text line
appends or replaces the previous one. Replace is a
(6)