Kit Components - Watts 957-FS Serie Instructions D'installation

Kit Components

All kits include the sensor activation module
and power adapter to enable the flood sensor.
Retrofit kits also include the flood sensor and
related components. If any item is missing,
speak with your account representative.
A. Sensor activation module with an 8' 4-conductor electrical
cable, ground wire, and 4 attachment screws
C. Flood sensor with mounting bolts (retrofit kit only)
NOTICE
When installing an air gap, attach the air gap brackets directly
onto the flood sensor.
Requirements
• #2 Phillips screwdriver
• 120VAC, 60Hz, GFI-protected electrical outlet
(for kit power adapter), or power source
ranging from 12V to 24V
• Wire stripper
NOTICE
The connection kits are suitable for installation on the
specified valve series only.
B. 24V DC power adapter
2