Kit Components - Watts 009-FS Serie Instructions D'installation

Kit Components

All kits include the sensor activation module and power adapter to enable the flood sensor. Retrofit
kits also include the flood sensor and related components. If any item is missing, speak with your
account representative.
A. Sensor activation module with an 8' 4-conductor electrical
cable, ground wire, and 4 attachment screws
C. 24V DC power adapter (requires a 120VAC, 60Hz,
GFI-protected electrical outlet)w
Requirements
• #2 Phillips screwdriver
• ⁄ " Allen wrench
3
16
• ½" Wrench
• Instrument with small tip to change DIP switch settings
• Power source, ranging from 12V to 24V
• Wire stripper
B. Four deflectors (For Series 009, sizes ½" to 2", with
flood sensor)
Retrofit kit for
sizes 2" to 3"
D. Included in retrofit kits:
• Sizes ½" to ¾" flood sensor with captive screw
and deflector
• Sizes 1" to 1½" flood sensor with 2 deflectors
(1" and 1¼" to 1½" ) and 2 mounting bolts
• Sizes 2" to 3" flood sensor with deflector and 2 sets of
mounting bolts (larger bolts for LF009 2½" to 3" only)
NOTICE
The connection kits are suitable only for new or existing
installations of the specified valve assemblies.
2