Assembly Rolling Chair - Extremis CAPTAIN'S CHAIR Mode D'emploi

ASSEMBLY ROLLING CHAIR

WHAT YOU NEED
1 person
no. 4 hex key
plastic hammer
+/- 10 min.
2. Secure each castor to the chair by gently tapping it
with the supplied block of wood and a hammer.
4. Position the frame on the shell as shown in the figure
above and fasten it by means of 4 hexagon socket bolts
M6x16.
8 assembly paw chair + assembly rolling chair
1. Turn the frame upside down and put a rubber ring and
a chair castor on each of the 4 legs.
COMMENTS:
PROPRIETARY AND CONFIDENTIAL : THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPER
3. Put the shell upside down on a soft surface with the
opening facing backwards so that you do not damage
the shell.
CC_WH_gemontee
TITLE
anual
PROJECT
unless otherwise specified: DIMENSIONS ARE IN
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF E