Connect The Power Supply - Joytutus CR32 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Attention
Before use, please read this manual carefully and keep it properly
1. Before use for the first time, clean the inside and outside of the car refrigerator with a damp cloth.
2. Do not fill in corrosive liquids. Do not pour liquids directly into the car refrigerator.
3. If not used for a long time, please disconnect the power supply and keep the inside of the car
refrigerator dry.
4. Please clean the inner cavity regularly to prevent odor bacteria and ensure food safety.

Connect the power supply

1. Find the DC power cord in the kit. Connect the DC plug to the power outlet of the car refrigerator.
2. Car refrigerators are placed in the car (back-up, seats...).
3. Arrange the power cable according to the space inside the car. The cigarette lighter plug is
connected to the car cigarette lighter hole.
4. Press and hold the "ON /OFF" button for 3 seconds and the car refrigerator will be ready for use.
Connect the car cigarette lighter
This product can be connected to more than one type of power supply.
The car refrigerator directly connect to 12V/24V DC power supply.
Car refrigerator with 100-240V AC AC adapter can be used home with voltages of 100-240V.
Car Refrigerator Operation
Car battery protection voltage reference
Built-in ECO electronic control module can automatically monitor the car battery voltage, Before the
power consumption to affect the normal ignition of the car, the car refrigerator will automatically
disconnect the power, In that way ensure that the car battery power will not be consumed too low
and affect the normal ignition of the car.
Voltage
12V
24V
Note: on the condition when the car refrigerator connects to the power and starts, OFF or ON refers
to the OFF or ON of the compressor.
Parts schematic
1-Compressor cooling hole
2- Fuse
3-Power interface
4-Three-level switch for battery protection
5-Handle
6-Digital touch screen control panel
7- Seal rubber ring
8- Refrigerator cabinet
DC power cord
Factory default voltage protection level sets to H level
H high level
11.3V OFF, 12.5V ON
24.6V OFF,26V ON
02
Connect the carrefrigerator
M medium level
10.1V OFF, 11.4V ON
22.3V OFF,23.7V ON
L low level
9.6V OFF, 10.9V ON
21.3V OFF,22.7V ON

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cr40Cr50

Table des Matières