Publicité
OPERATION continued :
Features a CD/DVD destroyer:
1) Lift safety cover to expose the CD/DVD entry.
2) Hold the CD/DVD by the edge and feed one at a time,
releasing when shredding begins.
3) Shredder will stop when the entire disc has been destroyed.
4) Close cover when done shredding media.
CAUTION:
Do not hold CD/DVD with finger through the center ring while
feeding into the shredder. Serious injury may occur.
Never feed more than one credit card or CD/DVD at a time.
LED Status indicators:
Power On
(green light)
CAUTION :
Avoid touching the document
feed opening with hands.
Product is not intended for use by
children (product is not a toy).
Do not insert foreign objects into
the document feed opening.
3
continue next page
Paper Overload
Wastebasket Full
(red light)
(red light)
Do not spray or keep any aerosol
products in or around shredder.
Avoid loose clothing or jewelry
touching the document feed opening.
Avoid getting hair near the
document feed opening.
CAUTION continued :
- RISK OF FIRE. NEVER dispose of flammable chemicals or materials that have come into contact
with flammable chemicals (for example, nail polish, acetone, gasoline) in the shredder basket.
- Always turn the shredder off and unplug the power cord from the AC outlet before cleaning it,
moving it, or emptying the waste basket.
- Never place the shredder near water or any heat source.
- Keep wastebasket emptied so that the shredder output is not impeded.
- Never use any petroleum based or flammable oils or lubricants in or around the machine as some
oils can combust causing serious injury.
- Never shred envelopes, labels or anything with glue or any sticky substance as this will lead to
paper jams.
- Do not use the shredder if the power cord is damaged in any way.
- Do not attempt to service this product yourself as doing so may expose you to sharp cutting blades
and/or electricity and will void the manufacturers warranty.
- Never let the wastebasket become full. This will lead to shredded material being pulled back up into
the shredder and cause jams.
- Never try to clean/clear the shredder blade.
TROUBLE SHOOTING FOR AURORA PAPER SHREDDERS :
The shredder does not work at all.
a) Make sure the shredder is plugged into an outlet which is in good working order.
b) Shredders with pull-out wastebaskets features a safety power cut off upon bin removal.
Make sure the pull-out wastebasket is properly set back into place.
c) In the event that the shredder is run continuously for too long and the motor overheats, a thermal
overload switch will automatically shut the power off. If this happens, move the switch to the off
position for 30 minutes or more before continuing.
The shredder only runs in "Rev" and "Fw" mode.
a) The shredder will not start running until paper, CD/DVD, or credit card is inserted into the appropriate
feed slot. It is normal for the motor to run for a moment after the shredder is powered on but it should
stop until paper is inserted. The trigger that activates the shredder is located directly in the center of
the feed slot. If the paper you are inserting is narrow, it may not be hitting the switch. It is possible
that the trigger, which activates the shredder, has become blocked with paper. Insert an index card,
directly in the center of the feed slot, and apply force. This will usually clear any paper blocking the
switch and force the switch closed.
4
Publicité
