Setting Alarms; Bluetooth Connection - Regent DAB+151 Manuel De L'utilisateur

Listening to a stored FM radio station
1. Press the PRESET button.
2. Then press the ◄ or ► buttons to select the stored station that you want to listen to.
3. Press the ENTER/SCAN button to confi rm.
4. You can also press and hold the INFO/MENU button and select the
option <FM station list> to display the list of stored FM stations.
Display modes
Press the INFO/MENU button to scroll through the FM information provided by the stations:

Bluetooth connection

Press the MODE button several times and select Bluetooth mode.
1. Once in Bluetooth mode, the message <Connecting> will appear on the display
screen. If no device is found and the <Connecting> option is replaced by
<Pairing>, this means that the device is ready to pair with a new device.
2. Activate your Bluetooth device and search the list for a device named "RT DAB+151".
3. Select and enable pairing for the "RT DAB+151" device. If you are prompted for a password,
enter "0000". A beep will sound and the mention BLUETOOTH will then stay on.
4. When pairing is complete, a beep will sound and <Pairing> is replaced with <Connected>.
5. If the connected device is out of range, the radio will attempt to connect for
2 minutes. When the device is in range, the radio will automatically reconnect.
6. Now you can enjoy music on your device.
7. To disconnect the devices, press the MODE button on the radio to switch to
another mode and deactivate the Bluetooth function of your device.
• The range in which Bluetooth can operate is approximately 7 meters.
Any obstacle between the devices can reduce this range.
• Only one Bluetooth device can be paired at one time.
• Not all Bluetooth devices are compatible.
22

setting alarms

Two alarms can be set on this radio.
To set two alarms
1. After you have set the time, press the ENTER/SCAN button
to access the screen for setting alarm 1.
2. You must then select the frequency of the alarm: Off , Once, Daily, Weekdays, or Weekends.
3. Set the alarm time using the ◄ and ► buttons.
4. Set the alarm mode: DAB, FM, alarm.
5. To adjust the volume of the alarm: press the ◄ or ► buttons to increase
or decrease the volume, and press the ENTER/SCAN button to confi rm.
6. Once your settings are correct, press the ENTER/SCAN button to save the alarm.
Activating the alarm reminder
When the alarm sounds in standby mode, turn the volume
wheel to activate the SNOOZE function.
The alarm will sound again after 5 minutes.
Deactivating the alarms
To cancel the alarm, go to the setting screen for alarm 1, press the ENTER/
SCAN button to select "OFF" and then save the alarm setting.
To set the second alarm, follow the same instructions as for the fi rst alarm.
CE Statement
Hereby, Ferguson Sp. z o.o. declares that this audio device is in compliance with the essential
requirements and other relevant provisions of RED Directive 2014/53/EU. The full text of the
EU declaration of conformity is available by following the link http://www.ferguson-digital.eu
EN
23