NGS SKYDUSK Mode D'emploi page 4

USER'S MANUAL
OPERATING INSTRUCTIONS
TURN ON/OFF THE TOWER SPEAKER
1. Connect the power cable to power socket, and press the
power switch to the ON position. The tower speaker is
power on.
2. Press the power switch to OFF position, the tower speaker
is power off.
PAIRING YOUR MOBILE BLUETOOTH DEVICE TO THE
TOWER SPEAKER
Pairing instructions may differ depending on the device
you are using. Please refer to your device's user manual for
further information.
Pairing
1. Make sure that your mobile device is within at least 1 meter
of the speaker when trying to pair and that the tower
speaker is power on and in Bluetooth mode.
4
2. If the tower speaker have not connect to any mobile
device, it will enter pairing mode automatically. If the tower
speaker have been connected, pressing and holding the
pairing button for 3 seconds till Bluetooth speaker enter
pairing mode. The "bt" icon of (9) LED display will flashes
rapidly when the tower speaker enter pairing mode.
3. Access the Bluetooth settings in your mobile device and
select Search/Scan for devices. Your mobile device will
begin to search for a Bluetooth signal.
4. You will see the name "NGS SKYDUSK / SKYDAWN" appear
in the device list. Select it to pair, and if a password or PIN is
needed enter the numbers "0000".
5. After a successful connection has been made the "bt" icon
of (9) LED display will light up.