Specifications - Kicker Street Serie Manuel D'installation

Specifications

ST Speakers
Woofer [in, mm]
Tweeter [in, mm]
Peak Power Handling [ Watts]
Recommended Amplifier Power [Watts RMS]
Sensitivity [1W, 1m]
Frequency Response [Hz]
Mounting Hole Diameter [in, mm]
Mounting Depth [in, mm]
Rated Impedance [Ω]
Magnet Material
Woofer Cone Material
Woofer Surround Material
Tweeter Dome Material
Tweeter Design
Note: All specifications and performance
figures are subject to change. Please visit
www.kicker.com for the most current
information. To get the best performance
from your new KICKER speakers, we
recommend using genuine KICKER
accessories and wiring. Please allow two
weeks of break-in time for the speakers to
reach optimum performance.
Pro Tip: You're a KICKER amplifier and a
few cables away from a full system upgrade
that will dominate any factory system!
KICKER line of amplifiers make it easy to
upgrade to solid bass with your existing
or stock source unit. Also, ask your dealer
about KICKER Subwoofer upgrades.
English
ST7MB ST9MB
7,18 9, 23
500 600
50–250 50–300
92 94
80–7.5k 80–5.5k
5-7/16,139 6-5/8, 168
3-3/16, 81 3-11/16, 93
4 or 8 4 or 8
Ferrite Ferrite
Pressed Pulp Pressed Pulp
Treated Cloth Treated Cloth
ST3TW ST4TW
1, 25 1.5, 38
100 100
15–50 15–50
106 108
3.5k–20k 3k–20k
4-5/8 X 6-9/16 148 X 167
3-3/8, 85
4 4
Ferrite Ferrite
Aluminum Aluminum
Bullet Bullet
4