Updesk PC-02 Manuel D'utilisation page 5

The following settings are only possible with a PC-01 or PC-02 control box
Locking the minimum height of the desk
1 . Place the desk at the desired minimum height;
2. Press «↑» & «↓» at the same time;
3. Then press and hold «↓». Then press «↑» three times with another finger;
4. Finally there will be a beep, this means that the minimum height is set.
The minimum height lock can be removed by repeating the above steps.
Locking the maximum height of the desk
1 . Place the desk at the desired maximum height;
2. Press «↑» & «↓» at the same time;
3. Then press and hold «↑». Then press «↓» three times with another finger;
4. Finally there will be a beep, this means that the maximum height is set.
The maximum height lock can be removed by repeating the above steps.
Caution:
- This product must comply with the technical parameters (see label control box);
- Keep the product away from water and corrosion-resistant gas;
- Is there a problem with the product? Please contact the point of sale.