Updesk PC-02 Manuel D'utilisation page 4

Memory positions
Handset instructions
Operation of the desk
- Press «↑» to move the desk up;
- Press «↓» to move the desk down.
Setting the memory function
1 . Place the desk up or down to the desired position;
2. Press «M» until the display flashes, then press «1 » to save position 1 ;
3. Repeat the procedure to save the other positions. (3 memory positions in total)
The memory positions are not lost when the power is turned o .
Initialization of the system (reset)
1 . Press and hold «↑» and «↓» until the frame has reached the lowest position;
2. Initialization is complete when you hear a beep.
Caution:
- This product must comply with the technical parameters (see label control box);
- Keep the product away from water and corrosion-resistant gas;
- Is there a problem with the product? Please contact the point of sale.
Display
M
Up Down
PC-02