Back to Basics AutoServe SR1000 Mode D'emploi page 9

AutoServe Smoothie Maker Control Switches
LOW runs the unit at low
speed. This speed should
be used for the initial 30
seconds of mixing.
READY LIGHT Indicates
that the power is on and
the machine is ready
for use.
PULSE gives short bursts
of power at high speed.
Use PULSE to begin the
mixing of ice and other
hard ingredients.
ADD LIQUIDS
The AutoServe Smoothie Maker mixing container is conveniently marked to create
perfect smoothies. To make your favorite frozen drinks, follow these simple steps:
ADD LIQUIDS
Add any combination of liquid ingredients up to the LIQUIDS mark on the mixing
container under SERVES 2 or SERVES 4. Liquids include any soft ingredients such
as fruit, milk, fruit juice, herbal supplements or yogurt in any combination you think
would be tasty.
We are, of course, partial to the Back to Basics smoothie mixes, which quickly and
easily make three delicious 8-ounce smoothies.
ADD ICE
Add ice or frozen ingredients until the total level reaches the FROZEN
INGREDIENTS line on the side of the mixing container. Frozen ingredients include
ice, frozen fruit, frozen yogurt, ice cream, etc.
SMOOTH IT
With the lid locked into place and the stir stick set in the hole on the lid, pulse the
mixture 2 or 3 times by pushing the PULSE button. Next, push the LOW button
and mix for 20-30 seconds. Push the HIGH button for the final 10-15 seconds of
mixing. Turn the stir stick counter-clockwise for best mixing results.
:
Dispense speed automatically engages
NOTE
when dispensing button is pushed.
OPERATION
HIGH runs the unit at high speed. This
speed should be used for the final
stages of mixing.
9
OFF shuts off the
machine.