Cleaning, Care & Maintenance; Technical Specifications - Caterlite CM352 Mode D'emploi

 This appliance has an overheat protection function. If the pan becomes too hot the
appliance will switch off, a buzzer will sound and the display will show "E2". Should this
happen, wait for 10 minutes to allow the appliance to cool before restarting, as above.
 Fan will continue to run while the glass surface temperature is over 80⁰C
Cleaning, Care & Maintenance
 Disconnect from the power supply and allow the appliance to cool before cleaning.
 Use warm, soapy water and a damp cloth to clean the appliance.
 DO NOT use abrasive cleaners or pads.
 Dry thoroughly after cleaning.

A CATERLITE dealer or qualified technician should carry out repairs if required.
Troubleshooting
If your CATERLITE appliance develops a fault, please check the following table before making a call
to the Helpline.
Fault
The appliance is not
working
"E2" on Display

Technical Specifications

Model Voltage
CM352 230V
50Hz
Probable Cause
The appliance is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Unsuitable cookware
Appliance has overheated
Power
Current
(max.)
2000 W 9 A
Action
Check the appliance is plugged in
correctly and switched on
Call CATERLITE agent or qualified
technician
Replace the plug fuse
Check power supply
Replace with suitable cookware
Allow to cool for 10 min before
restarting.
Power Temperature
range range
500 60-240°C
-2000W
UK
Dimensions (h Weight
x w x d) mm (kg)
45 x 295 x 370 2.6 kg