Control Panel - Caterlite CM352 Mode D'emploi

UK

Control Panel

Lock Timer
Operation
1. Connect the appliance to the mains power supply.
2. Place suitable cookware on to the centre of the glass plate.
3. 'Standby' light will flash. Press On/Off button and 'Heating' light will falsh. Press
Select button and your appliance will start to work
The Induction Hob will work by either running at a Power level or to a Temperature. When running at
a fixed temperature, the power to the pan will reduce as the pan heats up.
4. Press the Select button to cycle between the Power and Temperature functions.
5. Press the Increase or Decrease button to change the level of each function.
Function
Power
Temperature
Timer
NOTE - If unsuitable cookware or no cookware is present the induction cooker will
display 'E0' for 30 seconds before switching off

To use the timer press the timer button. The LCD display will switch to Timer and the
Timer indicator will illuminate and flash. Press the Increase or Decrease button to change
the timer. The Timer indicator will flash while the timer is in use. When the timer finishes
the hob will switch off.
 To lock the control panel press the Lock button. To unlock press and hold the lock button
 This appliance has an overheat protection function. If the pan becomes too hot the
appliance will switch off, a buzzer will sound and the display will show "E2". Should this
happen, wait for 10 minutes to allow the appliance to cool before restarting, as above.
 To use the timer press the timer button. The LCD display will switch to Timer and the
Timer indicator will illuminate and flash. Press the Increase or Decrease button to change
the timer. The Timer indicator will flash while the timer is in use. When the timer finishes
the hob will switch off.
 To lock the control panel press the Lock button. To unlock press and hold the lock button
Decreas e LCD Display
Panel
Level Increments
500w to 2000w 200w/300w
60C to 240C 20C
0 to 180min 5min
Increase
Select
Default
1200w
180C
0min
On/Off