Wall Mounting - Fox Spirit FQ270 Guide D'utilisation

Wall Mounting

This monitor only includes screws which may be used when attaching
the monitor to a VESA 75*75mm type mount. No VESA mount or
mounting accessory is included.
1. Take out the whole machine (with styrofoam) and place it on the horizontal table.
2. Remove the four screws at this position on the back cover, and screw the four
hexagon studs of accessories at this position for connecting to the wall bracket .
(this machine does not have wall bracket, it needs to be purchased separately,
and the standard VESA hole is 75 * 75mm)
3. The assembled product can be hung on the wall. Please do not pinch the screen
directly to prevent the screen from being broken.
Wall
Wall bracket
(not included)
Remove 4 screws
at this position
Wall adapter
ENG-10
Screws M4*35mm x 4
Screw the four hexagon
studs in this position