Philips 3000 Série Mode D'emploi page 14

EN
Problem Possible cause
The appliance The appliance is not
does not heat plugged in properly or
up. not switched on.
The appliance The appliance is not
does not plugged in properly or
produce any not switched on.
steam.
The appliance has not
heated up sufficiently.
You have not pressed the
steam trigger fully.
The water level in the
water tank is too low or it
has all been used up.
Steam plate is placed in
a horizontal position.
14
Solution
Check if the mains plug is
inserted properly and its wall
socket is working.
Check if the appliance is
switched on.
Check if the mains plug is
inserted properly and its wall
socket is working.
Check if the appliance is
switched on.
Let the appliance heat up ≈30
seconds ('steam-ready" light
will be on). When the
appliance is ready for use, the
light turns off.
Press the steam trigger fully
for a few seconds.
Unplug the appliance and
refill the water tank.
Use the appliance vertically,
wait for a few seconds for the
steam to be released.