Repair And Storage - Outsunny SPA GONFLABLE Manuel D'instructions

3. Open the outlet in the outer wall of the spa. Screw one end of inflation hose into it.
4. Pull the plastic plug off from the outlet in the inner wall of the spa, then the water will flow out.
5. When there is no water in the spa, you must put on the jet function 2-3minutes by press the "Jet" button to drain the water
in the air pipeline.
6. When drainage is finished, remove the inflation hose and screw the nut tight.
D Cleaning the spa
Detergent residues and dissolved solids from bathing suits and chemicals will gradually accumulate in the spa's water. 2.
To clean the spa, use soap and water then rinse.
Note: do not use hard brushes or abrasive cleaners.

REPAIR AND STORAGE

1. Spa repair
If the spa is torn or punctured, use the provided repair patch. Dry the area to be repaired. Apply the glue
in the accessory bag to the repair patch and then attach it onto the damaged area. Smooth the surface to remove any air
bubbles. A secure unnoticeable repair can usually be made.
2. Spa storage
Make sure all water is drained from the spa and control box. This is essential to extend the life of