Outsunny SPA GONFLABLE Manuel D'instructions page 12

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Base of the controller is made of environmental-friendly PU material that is soft and comfortable. Surface of the base can be
washed.
The controller is chrome-plated, which meets ROHS standards. Surface
films are glued to the controller by marine glue.
Body of spa:
1.
Water filling of water tank body: water should be filled to a position 20mm higher than the water line. If lower, heating may
not be realized. If higher, water may spill over the tank in use.
2.
Maintenance of water in the water tank body
2.1 Water in the water tank body should be filtered at fixed time regularly. It is not suggested to filter the water at all
times.
2.2 Water in the water tank body should be treated with chemical agents periodically. However, chemical

Publicité

Table des Matières
loading

Produits Connexes pour Outsunny SPA GONFLABLE

Ce manuel est également adapté pour:

848-013v81

Table des Matières