Teka RVI 20046 GBK Mode D'emploi page 40

 How to change the door opening
This appliance has reversible doors but is delivered with left opeing door, please follow below
instruction to change the door to the right opening.
(1) Top hinge (2) Door light switch (3)Location-plate (4)Supporter
(5) Bottom hinge
Move the appliance and placed it to a mat height around 200mm to support the cabinet, this is used
for leave the space for the door, because the door is bigger than the cabinet.
1. Open the door to 90-degree angle. Remove 4 screws and top hinge (1) at the left top of the cabinet,
and then remove the door from the cabinet and put the door in safe place (Fig.1);
2. Remove the door light switch (2) with 2 screws from the bottom central of the door, and then re-
install the door light switch (2) with 2 screws to the opposite direction, top central of the door (Fig.2);
3. Remove the location-plate (3) with screws from the right bottom of the door, and then install the
location-plate with screw to the diagonal direction (right top of the door) (Fig.2);
4. Incline the wine cooler with 45 degrees，remove the screws and the bottom hinge (5) at of the
right bottom of the cabinet.Remove the screws and supporter(4) at the left bottom of the cabinet , and
then install the supporter (4) to the right bottom of the cabinet. (Fig.3/4);
5. Install top hinge (1) to the bottom left of the door. (Fig.4);
6. Rotate the door at 180 degree (Fig.5);
7. Install the bottom hinge (5) with screws to the left top of cabinet, align the door with cabinet
(Fig.6);
1
3
5
1
4
5
support
2
2
3
4
6
38