Volume Control; Presetting Stations; Recalling A Preset Station - Sangean WR-3 Mode D'emploi

Volume control

Press VOLUME UP/Down
radio. There are 40 levels of volume.

Presetting stations

There are 10 memory presets on each of the MW and
FM wavebands.
1. Press the On/Off button to switch on your radio.
2. Tune to the station you would like to preset (tune as
previously described).
3. Press MEMORY button
4. Press the required Preset button (1 to 10).
5. Press MEMORY button again and the preset will be stored,
and "MEM" will disappear from the display.
6. Repeat this procedure for the remaining presets.
7. Stations stored in preset memories may be overwritten.

Recalling a preset station

1. When the radio is on, select FM or MW (AM) by pressing the
RADIO button.
2. Press the required Preset button (1-10), your radio will tune to
the station stored in preset memory.
or rotate the Control knob on the
. "MEM" will be shown on the display.
GB
8