Care And Maintenance; Power Failure - Teka RVU 10020 GBK Mode D'emploi

 Cleaning Your Wine Cooler

Turn off the power, unplug the appliance, and remove all items including shelves and rack.

Wash the inside surfaces with a warm water and baking soda solution. The solution should be about
2 tablespoons of baking soda to a quart of water.

Wash the shelves with a mild detergent solution.

Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical
parts.

Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a
clean soft cloth.
 Power Failure
 Most power failures are corrected within a few hours and should not affect the
temperature of your appliance if you minimize the number of times the door is opened. If the power
is going to be off for a longer period of time, you need to take the proper steps to protect your
contents.
 Vacation Time

Short vacations: Leave the Wine Cooler operating during vacations of less than three weeks.

Long vacations: If the appliance will not be used for several months, remove all items and turn off the
appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door
open slightly: blocking it open if necessary.
 Moving Your Wine Cooler

Remove all items.

Securely tape down all loose items (shelves) inside your appliance.

Turn the adjustable leg up to the base to avoid damage.

Tape the door shut.

Be sure the appliance stays secure in the upright position during transportation. Also protect
outside of appliance with a blanket, or similar item.
 Energy Saving Tips

The Wine Cooler should be located in the coolest area of the room, away from heat producing appliances, and
out of the direct sunlight.

CARE AND MAINTENANCE

34