Uline H-8456 Guide Rapide page 3

Figure 7
PAGE 3 OF 9
ASSEMBLY CONTINUED
Underneath
Top
7. If the drilled holes are accessible underneath the
Figure 4
table top, then secure this part of the shelf bracket to
table top with a M5 x 10 mm Phillips head bolt and
M5 flange nut using a Phillips screwdriver and 8 mm
wrench. (See Figure 7)
NOTE: If holes are not accessible, secure with
a sheet metal screw using a Phillips screwdriver.
Flange nut will not be needed.
1-800-295-5510
uline.com
0721 IH-8456