Cleaning; Changing The Battery; Changing The Fuse; Technical Data - PROTEC.class PMMM Mode D'emploi

Cleaning

Use a damp cloth and mild household cleaning agent to clean the instrument
should it become soiled through daily use. Never use aggressive cleaning
agents or solvents to clean the instrument.

Changing the battery

Change the battery when the battery symbol is displayed. Remove the test
leads from the measuring instrument before changing the battery!
Remove the screw on the rear of the instrument, open the battery
compartment and remove the used batteries. Insert new batteries (2 x 1.5 V
AAA
Micro). Replace battery compartment cover and screw tight.

Changing the fuse

When changing the fuse, always remove the test leads from the instrument
and undo all screws on the rear; carefully remove the rear of the housing
and replace the fuses with fuses of the same type. Fuse: F 250 mA or
10 A/690 V. Replace screws and screw tight.

Technical data

The accuracy relates to 1 year at a temperature between 18 °C-28 °C and
75% humidity (yearly calibrations are offered).
Autoranging and manual measurement range selection.
Max. voltage between the connection socket and ground: 600 V AC/DC.
Only use the specified batteries!
Batteries should not be disposed of in household rubbish!
Please observe any relevant laws pertaining to their disposal
in the country of use.
Only use the specified fuses!
29