Troubleshooting - auna PRO Duett Quartett Fix Mode D'emploi

TROUBLESHOOTING

Problem
No sound.
The signal strength is
significantly weaker
than with conventional
wiring / Different
guitars have different
volume levels.
Sound sounds
increasingly distorted.
Interferences disturb
the sound.
Indicator
The red transmitter
LED is not lit.
The transmitter LED
lights up.
The receiver LEDs light
up.
The transmitter LEDs
light up, the receiver
LEDs do not light up.
The receiver LEDs light
up.
The receiver LEDs light
up.
The signal LEDs light
up.
Suggested Solution
Turn on the
transmitter. Make sure
that charged batteries
are inserted correctly.
Is the mute (MUTE)
function activated?
Turn up the volume.
Make sure that the
connection from the
audio outputs to your
mixing console or
similar works.
Make sure that the
frequencies on the
transmitter and
receiver are set the
same.
Compensate for the
problem using the
GAIN control on the
transmitter and the
volume control on the
receiver.
The batteries are dead.
Replace them.
Locate possible
sources of interference
(other transmitters,
steel armor). Turn off
transmitters that are
not needed. Mark
"Dead Spots".
EN
23