Télécharger Imprimer la page

Publicité

Liens rapides

IT
APPOGGIO MOBILE PER ASTA
COMPONENTI
1.
Rivetto in INOX ø 5 x 10
2.
Dado
UNI 7474 M6
3.
Vite UNI 5739
M6 x 10
4.
Appoggio mobile
5.
Attacco piedino per asta
001G02000 o 001G04000
6.
Attacco piedino per asta
001G03750
7.
Attacco piedino per asta
001G03752
MONTAGGIO
- Fissare l'attacco piedino sulla parte inferiore e all'estremità dell'asta
con i rivetti in dotazione
.
Nota: in caso di asta semi-ellittica (001G03750), tagliare una parte del
profi lo in gomma per poter fi ssare l'attacco del piedino;
EN
SWING REST FOR BARRIER ARM
COMPONENTS
1.
INOX ø 5x10 Rivet
2.
M6 UNI 7474 Nut
3.
M6 x 10 UNI 5739 screw
4.
Swing rest
5.
Arm
attachment 001G02000 or 001G04000
6.
Arm attachment
001G03750
7.
Arm attachment
001G03752
MOUNTING
- Fasten the arm attachment on the lower end of the arm with the
supplied rivets
.
Note: with the semi-elliptical arm (001G03750), cut part of the rubber
profi le to be able to fasten the arm attachment;
FR
SUPPORT MOBILE POUR LISSE
COMPOSANTS
1.
Rivet en INOX Ø 5 x 10
2.
Écrou M6 UNI 7474
3.
Vis M6 x 10 UNI 5739
4.
Support mobile
5.
Attache pied pour lisse 001G02000 ou 001G04000
6.
Attache pied pour lisse 001G03750
7.
Attache pied pour lisse 001G03752
MONTAGE
- Fixer l'attache du pied sur la partie inférieure et sur l'extrémité
de la lisse avec les rivets fournis
.
Note : en cas de lisse semi-elliptique (001G03750), découper une
partie du profi lé en caoutchouc afi n de pouvoir fi xer l'attache du pied ;
119GT73 - ver. 2.0 .0 - 03/2011
119GT73
- Fissare l'appoggio mobile sull'attacco con la bulloneria in dotazione
- Regolare l'altezza dell'asta con la vite registro sulla parte inferiore
dell'appoggio mobile
.
Dismissione e smaltimento - Prima di procedere è sempre opportuno
verifi care le normative specifi che vigenti nel luogo d'installazione.
I componenti dell'imballo (cartone, plastiche, etc.) sono assimilabili ai rifi uti
solidi urbani e possono essere smaltiti senza alcuna diffi coltà, semplicemente
eff ettuando la raccolta diff erenziata per il riciclaggio.
Altri componenti (schede elettroniche, batterie dei trasmettitori, etc.) possono
invece contenere sostanze inquinanti. Vanno quindi rimossi e consegnati a
ditte autorizzate al recupero e allo smaltimento degli stessi.
NON DISPERDERE NELL'AMBIENTE!
I dati e le informazioni indicate in questo manuale sono da ritenersi suscettibili di
modifica in qualsiasi momento e senza obbligo di preavviso.
- Fasten the swing rest onto the attachment using the supplied nuts and
bolts
;
- Adjust the height of the arm using the adjustment screw found on
the lower part of the swing rest
.
Dismantling and disposal - Before dismantling and disposing always do the
following: check the applicable laws specifi c to your jurisdiction.
The components of the packaging (i.e. cardboard, plastic, etc.) are solid urban
waste and may be disposed of without much trouble, simply by separating
them for recycling.
Other components (i.e. control boards, transmitter batteries, etc.) may contain
hazardous substances. These must therefore be handed over the specially
authorised disposal fi rms.
DO NOT DISPOSE OF IN NATURE!
The data and information in this manual may be changed at any time and without
prior notice.
- Fixer le support mobile sur l'attache avec les boulons fournis
- Régler la hauteur de la lisse avec la vis de réglage sur la partie
inférieure du support mobile
.
Élimination et mise au rebut- Avant d'eff ectuer ces opérations il est
toujours recommandé de vérifi er les normes spécifi ques en vigueur sur
le lieu d'installation.
Les composants de l'emballage (carton, plastiques, etc.) sont assimilables
aux déchets urbains solides et peuvent être éliminés sans aucune
difficulté, simplement en procédant au recueil différencié pour le
recyclage.
D'autres composants (cartes électroniques, batteries des émetteurs,
etc.) peuvent par contre contenir des substances polluantes. Il faut donc
les désinstaller et les remettre aux entreprises ayant les autorisations
nécessaires pour la récupération et l'élimination de ceux-ci.
NE PAS ÉLIMINER DANS L'ENVIRONNEMENT !
Les données et les informations contenues dans ce manuel sont susceptibles de su-
bir des modifications à tout moment et sans aucune obligation d'avertir à l'avance.
;
1
4
3
2
5
G02000 / G04000
G02000 / G04000
;
6
7
G03750
G03752
G03750
G03752
119GT73 - ver. 2.0 .0 - 03/2011
119GT73
Italiano
IT
IT
English
EN
EN
Français
FR
FR
Deutsch
DE
DE
Español
ES
ES
Nederlands
NL
NL
Portugues
PT
PT
Polski
PL
PL
Русский
RU
RU
www.came.com

Publicité

loading

Sommaire des Matières pour CAME G02808

  • Page 1 - Fixer l’attache du pied sur la partie inférieure et sur l’extrémité bir des modifications à tout moment et sans aucune obligation d’avertir à l’avance. www.came.com de la lisse avec les rivets fournis Note : en cas de lisse semi-elliptique (001G03750), découper une partie du profi...
  • Page 2 - Die bewegliche Aufl agenstütze mit den mitgelieferten Schrauben und - Fixe o apoio móvel na conexão com parafusos e porcas fornecidos PENDELSTÜTZE APOIO MÓVEL PARA HASTE Muttern am Schrankenhalter befestigen - Ajuste a altura da haste com o parafusos de registo na parte inferior - Die Höhe der Schranke mit Hilfe der Einstellschraube unter der do apoio móvel BESTANDTEILE...