Publicité
LINE ARRAY
SAFETY
The flying of cabinets should be performed only by properly qualified persons, in compliance with all local laws
and using approved hardware.
It is the installers responsibility to ensure the point of fixing is structurally adequate to support the weight of the
cabinets.
The rigging or suspended mounting of these speakers can expose members of the public to serious health risks
or even death.
Under no circumstances attempt to rig, suspend or otherwise mount this system unless you are fully qualified
and certified to do so by relevant local, state and national authorities. All relevant safety regulations must be
followed. If you are not properly qualified or do not know of pertinent regulations, consult qualified personnel for
advice and assistance.
For added safety, it is strongly recommended that the audio connections, mechanical fixings and mounting
brackets are checked periodically.
Depending on local regulations, additional pull back supports may be required.
SPECIFICATION
Suspension Type
Mounting Type
Max Load Weight
Max Unit Load
Unit dimensions (HWD)
Unit weight
Carton dimensions (HWD)
Packed weight
In the interest of continued development, HH reserves the right to amend product specification without prior notification.
W
H
TNA-BRK1
Model
The bracket allows you to fit upto three D-shackles (included)
Five M8 mounting points hold the bracket securely to the cabinet
120Kg, 264lbs
8x TNA-2051 & 2x TNA-1200S OR 4x TNA-1200S
64 x 451 x 340mm, 2.5" x 17.8" x 13.4"
5.6Kg, 12.3 lbs
145 x 505 x 430mm, 5.7" x 19.9" x 16.9" , 0.031 M3
6.7Kg, 14.8 lbs
Designed and Engineered in the UK by HH Electronics LTD.
TNA-BRK1 MAXIMUM SUPPORT LIMIT
TWO TNA-1200S
D
UPTO EIGHT TNA-2051*
*extra pull-back support required for more than 4 TNA-2051
ARRAY
5
Publicité
